How to reset the total flow of Dalian New Concept Electromagnetic Flow Meter to zero

『Flow meter reset to zero』Related information(clamp on meter|electromagnetic meter|venturi meterrotameter|orifice meter|ultrasonic flow meter|mass flow meter|coriolis mass flow meter|coriolis flow meter|magnetic flow meter|magmeter flow meter|magflow flow meter|mag meter flow meter|electromagnetic flow meter|vortex flow meter|turbine flow meter|thermal mass flow meter|thermal flow meter|rotameter flow meter)

1. The total amount reset method for Jiangsu Yalong YL-LDE-150 electromagnetic flowmeter is as follows. The core operation is to enter the setting menu through the header button. Due to possible differences between different batches or software versions, if the operation is ineffective, it is recommended to first contact the manufacturers technical support. 1. General key operation method (preferred method) This is the most commonly used reset method, which enters the menu settings through the key combination on the device header: * On the interface where the flowmeter displays the measured value normally, press the keys in order: once "→" (right-click), once "↓" (down key), once "→" (right-click), twice "↓" (down key), once "→" (right-click). After this operation, you should enter the parameter setting interface. * After entering the setting menu, use the "↓" or "↑" keys to move the cursor and find the names "Reset Total Quantity", "Clear Accumulated Quantity" or similar. Meaning options. * After selecting, press the "Confirm" button (or select "YES" according to the prompt) to perform the operation. Usually, it needs to be confirmed again and cleared to complete the process. If the flowmeter has been connected to the control system or is equipped with dedicated software, it can be operated through the upper computer: * Open the matching flowmeter configuration software on the computer and log in to the system. *Find and select the corresponding YL-LDE-150 device in the software, and enter the parameter settings interface. *Find the "Accumulated Quantity Reset" option in the parameter list, click to execute and confirm

3. Important Operation Instructions * Prioritize consulting the instruction manual: The most

accurate operation guide is always the instruction manual that comes with the product, and there may be slight differences in button definitions or menu structures between different versions of the device. *Contact manufacturer technical support: If none of the above methods are effective, or if you are unsure about the operation process, the most reliable way is to directly contact Jiangsu Yalongs customer service or technical department (providing equipment model and serial number), who can provide precise guidance or remote assistance for that model. *Safe operation: Before performing any setting operation, please ensure that the operation does not affect the current production process and be aware of the consequences of resetting (historical cumulative data will be reset to zero).

2. Detailed steps and precautions for cumulative zeroing of the Xinier flowmeter

The cumulative zeroing of the Xinier flowmeter should be strictly carried out in accordance with the operation manual, with a focus on stabilizing the equipment status and standardizing the operation process.

『SILVER Official Website SERVICE』