Current position > Product detail
『Glue flowmeter』Related information(clamp on meter|electromagnetic meter|venturi meterrotameter|orifice meter|ultrasonic flow meter|mass flow meter|coriolis mass flow meter|coriolis flow meter|magnetic flow meter|magmeter flow meter|magflow flow meter|mag meter flow meter|electromagnetic flow meter|vortex flow meter|turbine flow meter|thermal mass flow meter|thermal flow meter|rotameter flow meter)
1. What are the requirements for the installation range of the floating ball flowmeter?
The floating ball flowmeter is not a conventional installation type. If it is installed by pasting, there are clear installation requirements for the range, as follows: 1 Pipeline surface requirements • Cleanliness: The bonding area must be free of oil stains, rust, dust, and other impurities. Before installation, the surface should be sanded with sandpaper and cleaned with a cleaning agent to ensure the adhesion between the adhesive and the pipeline. • Flatness: The roughness Ra value of the pipeline surface should be ≤ 6.3 μ m. Uneven surfaces can cause loose adhesion, gaps, and affect installation stability.
2. Material and shape requirements • Material compatibility: Suitable adhesives should be selected according to the pipeline material, such as epoxy adhesives for metal pipelines and specialized adhesive adhesives for plastic pipelines. • Shape limitation: Only applicable to straight pipe sections, the bending radius of the pipeline should not be less than 5 times the diameter of the pipeline, to avoid excessive bending that interferes with the movement of the floating ball and affects measurement accuracy. Humidity: The relative humidity of the installation environment should be controlled below 70%. Excessive humidity can cause water vapor to accumulate on the surface of the adhesive, which can damage the bonding effect.
2. What about the glue spraying system with robot assistance?
After the introduction of robot assistance in the glue spraying system, significant improvements will be achieved in efficiency, accuracy, production capacity, and flexibility, while promoting the upgrading of multi
_600x400.jpg)
1. Consistency improvement of core advantages: Robot glue spraying achieves standardized operation through program control, reducing error rate by more than 80% compared to manual operation, ensuring that the glue spraying amount, position, and mode of each product are completely consistent.
. For example, in electronic component assembly, uniform adhesive layer thickness can reduce contact problems caused by uneven adhesive volume, lower defect rates, and save rework costs. Millimeter level precision control robots can be programmed to achieve millimeter level motion accuracy, coupled with high-precision nozzles, to achieve precise dispensing of small components (such as 0.3mm chip pins). In medical device manufacturing, this precision ensures that there are no bubbles or glue overflow at the catheter bonding site, meeting medical grade sealing requirements. 24/7 efficient production robots are not affected by fatigue and can operate continuously for 24 hours, increasing production efficiency by 3-5 times compared to manual labor. In the automotive industry, a single robot can complete over 2000 dispensing operations per hour, meeting the needs of large-scale production lines. Multi mode flexible adaptation allows for quick switching of spray paths such as points, lines, arcs, and circles through programming, adapting to different product requirements. For example, in the aerospace field, robots can automatically adjust the spraying trajectory based on composite material structures, achieving uniform coverage of complex surfaces. The IoT integrated optimization robot can be connected to the factorys IoT sys