Product
ProductCurrent position > Product detail

DN200 Vortex Flow Meter

『DN200 Vortex Flow Meter』Related information(clamp on meter|electromagnetic meter|venturi meterrotameter|orifice meter|ultrasonic flow meter|mass flow meter|coriolis mass flow meter|coriolis flow meter|magnetic flow meter|magmeter flow meter|magflow flow meter|mag meter flow meter|electromagnetic flow meter|vortex flow meter|turbine flow meter|thermal mass flow meter|thermal flow meter|rotameter flow meter)

1. Specifications and models of flow meters

Common specifications and models of different types of flow meters are summarized as follows

1. Vortex flow meter models cover different media and flow scenarios, including FS series for industrial gas measurement and micro vortex flow meters for small flow detection

1 mm to several meter caliber

4. Mass flow meters, taking the HH series as an example, are divided according to the nominal diameter of the pipeline.

DN

6、DN

10、DN1

5、DN2

5、DN40、DN50、DN80、DN100（ Unit: mm) There are a total of 8 specifications for physical flow meters. Taking EXAIRs 9090 model as an example, it is compatible with 1/2 "to 8" Schedule 40 iron pipes and 25mm to 101mm aluminum pipes, and can support up to 4 "copper pipe air flow measurement. • Vortex/Swirl Vortex Flowmeters: including the conventional DN20-DN200 Swirl Vortex Flowmeters from Astra Instruments and the LUGB series from Chongqing Chuanyi. Ultrasonic flow meters: such as Emerson FLUXUS G721 CA clamp type, Astra ATLS clamp type, and other models.

2. Flow range of steam vortex flowmeter

The flow range of steam vortex flowmeter varies depending on its model and diameter.

. The diameter (DN) represents the diameter of the pipeline, while the flow range represents the flow value that the flowmeter can measure. The model OW-LU-25 is suitable for DN25 pipelines, with a flow range of liquid 1-10 m ³/h and gas 25-60 m ³/h. For steam flow, it is recommended to refer to the instruction manual. For large pipelines above DN300, it is recommended to use an inserted vortex flowmeter. The model OW-LU-32 is suitable for DN32 pipelines, with a flow range of 1.5-18 m ³/h for liquids and
DN200 Vortex Flow Meter
15-150 m ³/h for gases. The model OW-LU-40 is suitable for DN40 pipelines, with a flow range of 2.2-27 m ³/h for liquids and 22.6-150 m ³/h for gases. The model OW-LU-50 is suitable for DN50 pipelines, with a flow range of liquid 4~55 m ³/h and gas 35~350 m ³/h. The model OW-LU-80 is suitable for DN80 pipelines, with a flow range of 9-135 m ³/h for liquid differential and 90-900 m ³/h for gas. The model OW-LU-100 is suitable for DN100 pipelines, with a flow range of 14-200 m ³/h for liquids and 140-1400 m ³/h for gases. The model OW-LU-150 is suitable for DN150 pipelines, with a flow range of 32-480 m ³/h for liquids and 300-3000 m ³/h for gases. The model OW-LU-200 is suitable for DN200 pipelines, with a flow range of 56~800 m ³/h for liquids and 550~5500 m ³/h for gases. Based on the above information, you can choose a suitable steam vortex flowmeter according to your pipeline diameter and understand the flow range it can measure. The steam vortex flowmeter is mainly used for measuring the flow rate of steam medium fluid in industrial pipelines. The characteristics of steam vortex flowmeter are small pressure loss, large range, high accuracy, and it is almost not affected by fluid density, pressure, temperature, viscosity and other parameters when measuring the volumetric flow rate under working conditions.

3. Flow range of vortex flowmeter

The flow range of vortex flowmeter is mainly determined by the sensor diameter and fluid properties. The larger the diameter, the wider the measurable flow range.

. The conventional liquid measurement range is between 0.5m/s and 7m/s flow rate, and the gas measurement range is between 5m/s and 60m/s. 1. Correspondence between caliber and flow rate (under normal te

『SILVER Official Website SERVICE』

Copyright2026SILVER E-Commerce
[email protected]
+86 15365082610