Current position > Product detail
『Unit of flow meter』Related information(clamp on meter|electromagnetic meter|venturi meterrotameter|orifice meter|ultrasonic flow meter|mass flow meter|coriolis mass flow meter|coriolis flow meter|magnetic flow meter|magmeter flow meter|magflow flow meter|mag meter flow meter|electromagnetic flow meter|vortex flow meter|turbine flow meter|thermal mass flow meter|thermal flow meter|rotameter flow meter)
1. What is the unit of a flowmeter?
The unit of a flowmeter is divided into two categories: volumetric flow rate and mass flow rate, based on the type of measurement. The specific units and uses are as follows:
1. Volume flow rate unit • cubic meter per second (m ³/s): an internationally recognized unit, often used for large-scale water conservancy projects or river flow monitoring, such as the Yangtze River hydrological station, which is preferred for calculating runoff.
. • liters per second (L/s): a common unit in industrial laboratories or chemical production, suitable for accurate control scenarios with small liquid flow rates, such as flow monitoring in liquid filling lines. • cubic meters per hour (m ³/h): It is widely used in commercial fields, such as gas meters in residential areas and air volume labeling in central air conditioning systems.2. Mass flow unit • kilogram per second (kg/s): It is commonly used in aerospace fuel supply systems, food processing, and other fields that require high quality accuracy, such as real-time monitoring of aircraft engine fuel flow. • Ton per hour (t/h): In the metallurgical industry, high flow scenarios such as iron transportation and steam pipelines in power plants, such as blast furnace iron flow rates reaching up to 1200t/h.
2. How to convert steam flowmeter T and unit Nm ³?
If T represents tons, the conversion relationship between the steam flow meter T and the unit Nm ³ is as follows: 1 ton=1000 kg=1000 kg1 Nm ³=1000 cubic meters. Therefore, the conversion relationship between the steam flow meter T and Nm ³ can be done in the following way: T tons=T * 1000 kgT tons=T * 1000 kg=T * 1000 m ³=T Nm ³, which means that the tonnage o
_600x400.jpg)
3. Is there a difference between the unit of n cubic meters/h and cubic meters/h for a thermal mass flowmeter?
1. Nm3/h is usually referred to as the standard cubic meter, representing the flow measurement unit under standard conditions.. The standard state refers to the condition where the temperature is 0 ℃ and the pressure is 1 atmosphere (1atm).
2. m3/h represents the flow unit at the actual working temperature and pressure. In engineering practice, Nm3/h is often used to describe the flow rate of gas or steam, especially in the data specifications of equipment such as air compressors and compressors. It refers to the gas volume flow rate under standard conditions
4. "Nm3" under nominal conditions refers to the gas volume at 0 ℃ and 1atm. In actual working conditions, the volume is represented by "m3".
5. Different equipment manufacturers and industries may have different definitions of standard conditions. For example, some compressor samples may indicate that the lead standard conditions are 1atm and 20 ℃
6. To accurately convert Nm3/h to m3/h, it is necessary to know the pressure and temperature under actual working conditions. This can be calculated using the ideal gas state equation PV=nRT, where P is pressure, V is volume, n is the amount of matter, R is the ideal gas constant, and T is absolute temperature.