Product
ProductCurrent position > Product detail

Corrosion sewage flowmeter

『Corrosion sewage flowmeter』Related information(clamp on meter|electromagnetic meter|venturi meterrotameter|orifice meter|ultrasonic flow meter|mass flow meter|coriolis mass flow meter|coriolis flow meter|magnetic flow meter|magmeter flow meter|magflow flow meter|mag meter flow meter|electromagnetic flow meter|vortex flow meter|turbine flow meter|thermal mass flow meter|thermal flow meter|rotameter flow meter)

What are the commonly used flow meters and what are their characteristics?

1. Electromagnetic flowmeter: Based on the law of electromagnetic induction, it is suitable for measuring various corrosive liquids such as acids, alkalis, salts, as well as flammable and explosive media, industrial wastewater, pulp, mud, etc. This flowmeter is not suitable for measuring gases, vapors, and liquid media with low conductivity, nor can it measure high-temperature and high-pressure fluids. Usually installed vertically, requiring full flow in the pipe. Vortex flowmeter: Utilizing the principle of fluid free oscillation, it is mainly used for measuring the flow of medium fluids in industrial pipelines, including gases, liquids, vapors, etc. Its characteristics are no pressure loss, large range, high accuracy, and less affected by factors such as fluid density, pressure, temperature, viscosity, etc. Suitable for horizontal and vertical installation

3. Turbine flowmeter: Based on the principle of fluid momentum, it is suitable for flow measurement of petroleum, organic liquids, inorganic liquids, liquefied gas, natural gas, coal gas, and low-temperature fluids. Capable of measuring pulsating flow, but installation direction is limited to horizontal

4. Differential pressure flowmeter: using the principle of fluid static pressure difference, it can measure the flow of liquids, gases, and vapors. It is currently the most widely used flow measurement instrument, but it is affected by factors such as pressure, temperature, and density. Both horizontal and vertical installations are applicable. 5. Coriolis force mass flowmeter: Based on the principle of sensor vibration, it is widely used in petrochemical and other field

Corrosion sewage flowmeter
s and is one of the most advanced flow measurement instruments. 6. Ultrasonic flowmeter: It is not affected by factors such as pressure, temperature, viscosity, conductivity, flow state, etc. It can be installed horizontally or vertically, and the flow rate is full of pipes. 6. Ultrasonic flowmeter: It uses the principle of ultrasonic pulse. Currently, it can only be used in China to measure the flow rate of fluids at 200 ℃ to simulate turbulence, and is suitable for flow measurement of highly corrosive, non-conductive, radioactive, and flammable and explosive media. 7. Elliptical gear flowmeter: Based on the principle of fluid pressure difference, it is a volumetric flowmeter used for precision measurement of liquid flow rate or instantaneous flow rate in pipelines. 8. Target flowmeter: It is related to pressure and temperature, but not to Reynolds number. It is suitable for both horizontal and vertical installation. It has a wide measurement range and can accurately measure gas and liquid flow rates under various working conditions such as room temperature, high temperature of 500 degrees, and low temperature of -200 degrees. Accurate measurement, with an accuracy of up to 0.2%, easy to install and maintain.

2. What are the commonly used flow meters for sewage flow monitoring?

3. What are the reasons for the unstable output of intelligent electromagnetic flow meters?

The main reason for the unstable output of intelligent electromagnetic flow meters is the corrosion and damage of the key components (lining, electrodes) of the flow meter by the medium, which leads to signal interruption.. The specific analysis is as follows: the corrosiveness of the medium does not match the users measurement

『SILVER Official Website SERVICE』

Copyright2026SILVER E-Commerce
[email protected]
+86 15365082610