Flow meter standard | Flow meter calibration regulations | Panyu ultrasonic flowmeter manufacturer

『Flow meter standard』Related information(clamp on meter|electromagnetic meter|venturi meterrotameter|orifice meter|ultrasonic flow meter|mass flow meter|coriolis mass flow meter|coriolis flow meter|magnetic flow meter|magmeter flow meter|magflow flow meter|mag meter flow meter|electromagnetic flow meter|vortex flow meter|turbine flow meter|thermal mass flow meter|thermal flow meter|rotameter flow meter)

1. National Standard for Float Flow Meter

The national standards for float flow meters mainly include JJG 257-2007 and GB/T 12241-2005. The following is a specific introduction: JJG 257-2007: "National Metrology Verification Regulations of the Peoples Republic of China - Float Flow Meter" is the core metrological verification standard for float flow meters, which was released on August 21, 2007 and officially implemented on February 21, 2008. This standard is approved by the General Administration of Quality Supervision, Inspection and Quarantine of China and is applicable to the initial calibration, subsequent calibration, and in-service inspection of various types of float flowmeters such as metal tube float flowmeters and glass tube float flowmeters. The core content includes: calibration scope: clarifying the measurement range, accuracy level (such as 1.0 level, 1.5 level, 2.5 level, etc.), and applicable medium (liquid or gas) of the flowmeter. Verification items: including appearance inspection, sealing test, indication error verification, repeatability test, etc., to ensure that the flowmeter meets the accuracy requirements within the range. Verification method: It is required to use standard devices (such as liquid flow standard devices and gas flow standard devices) for comparison, and verify the performance of the flowmeter through real flow calibration. Result judgment: Based on the indication error and whether the repeatability of the posture is within the allowable range, determine whether the flowmeter is qualified and issue a calibration certificate or result notification. GB/T 12241-2005: This standard is a specialized technical standard for glass float flow meters, which specifies the technica

l requirements for their design, manufacturing, and inspection. The main content includes: technical requirements: clarifying the structural dimensions, material selection (such as glass tube material requiring pressure resistance and corrosion resistance), scale identification, etc. of the flow meter to ensure that the product meets safety and usage standards. Test methods: including pressure resistance test, sealing test, flow characteristic test, etc., to verify the reliability of the flowmeter under extreme conditions. Inspection rules: Specify the items and sampling plans for the inspection and type inspection of the drying plant to ensure the consistency of product quality in mass production. The two standards provide scientific basis for the production, use, and supervision of float flowmeters from the perspectives of metrological verification and technical specifications. JJG 257-2007 focuses on the metrological performance verification of flow meters and serves as the basis for calibration by legal metrology institutions; GB/T 12241-2005 focuses on the technical details of glass material flow meters, guiding enterprises to optimize product design. In practical applications, appropriate standards should be selected based on the type of flow meter (metal tube or glass tube) and the purpose (industrial measurement or laboratory analysis), and regularly inspected to ensure measurement accuracy.

2. Flow meter installation requirements are usually "front 5, back 3" or "front 10, back 5", depending on the actual application scenario and fluid characteristics.

. In most cases, top 5, bottom 3 is a widely accepted standard. The installation position of the flowmeter is crucial for its accuracy and performa

Flow meter standard | Flow meter calibration regulations

1. National Standard for Float Flow Meter

2. Flow meter installation requirements are usually "front 5, back 3" or "front 10, back 5", depending on the actual application scenario and fluid characteristics.

『SILVER Official Website SERVICE』