Current position > Product detail
『Yokogawa electromagnetic flowmeter from Japan』Related information(clamp on meter|electromagnetic meter|venturi meterrotameter|orifice meter|ultrasonic flow meter|mass flow meter|coriolis mass flow meter|coriolis flow meter|magnetic flow meter|magmeter flow meter|magflow flow meter|mag meter flow meter|electromagnetic flow meter|vortex flow meter|turbine flow meter|thermal mass flow meter|thermal flow meter|rotameter flow meter)
1. How to cut off the small signal of Yokogawa ADMAG SE 204mm electromagnetic flowmeter
The small signal cut-off function of Yokogawa ADMAG SE 204mm electromagnetic flowmeter can be adjusted by entering the setting menu through the local button or communication interface. 1. Operation steps • Enter parameter setting mode: Enter the setting menu Senpai through the buttons of the flowmeter body or the HART/RS-485 communication interface (with the help of a handheld device or software), and find the "Flow Cutoff" or "Low Flow Cutoff" option. • Set cut-off value: The cut-off threshold can be expressed in flow units (such as m ³/h) or full scale percentage (%), and empirical values are recommended to be set at 0.5% -5% full scale (0.1% -1% for high-precision applications). For example, when the range is 100m ³/h, 0.5-5m ³/h can be set. • Select the cutting mode: zero mode (output 0 when the flow rate is below the threshold) or hold mode (this mode maintains the previous valid value, suitable for situations that require continuous recording). • Save and exit: After confirming the parameters, save and observe whether the display is stable.
2. Precautions - For media with low conductivity or containing bubbles, the cut-off value should be appropriately increased to avoid noise interference. -In batch processing or intermittent processes, it is necessary to ensure that the cutting and trimming values do not affect the flow records during the start stop phase. -After long-term use, electrode contamination or changes in operating conditions require recalibration of the cut-off value. -If the air traffic control detection function is supported, it can be linked with small signal cutoff to improve reliability.
2>2. What is the approximate price of a water flow meter? 3. What are the models of Yokogawa electromagnetic flow meters, what are their advantages, and what other flow meter products are there? _Hundred ..
The model of Yokogawa Electromagnetic Wheel Flow Meter is AXF, and other products include Yokogawa Vortex Flow Meter, Electromagnetic Flow Meter, Rotary Flow Meter, Mass Flow Meter, and EJA Pressure Transmitter. Advantages: Yokogawa AXF electromagnetic flowmeter is an advanced designed electromagnetic flowmeter, which is improved from the ADMAG series that has been used and tested on site. The ADMAG AXF housing is divided into two chambers, which separate the electrical part from the surrounding area for easy wiring. The He limb ADMAG AXF adopts dual frequency excitation, with fast response and side signal elimination output noise function. There are PFA, polyurethane, ceramic and other lining options available, so the application range of electromagnetic flowmeter is very wide. Other brand products include: Honeywell full series transmitters, Rosemount series transmitters BT200 handheld controller HART475 handheld controller, etc.
4. Yokogawa electromagnetic flowmeter fault codes and solutions
Yokogawa Dianzhou Xiaoci flowmeter fault codes are divided into two categories: "with code alarm" and "no code abnormality", corresponding to different maintenance directions.
1. Handling of simulated wheel tracks with code 1 Code E004 (communication failure) • Possible causes: abnormal physical connection of communication lines, mismatched protocol parameters between devices, and hardware damage to communication modules. • Response process: sequentially check whether the wiring terminals ar