Company Profile

Air Flow Meters and Monitors for Commercial HVAC Balancing and Fan Performance Equipment

Quick Answer: Silver Automation Instruments supplies thermal mass flow meters and differential pressure transmitters for commercial HVAC balancing and fan performance testing. These instruments give repeatable duct air data in m3/h or Nm3/h with 4-20 mA HART output. Send your duct size (DN), air velocity (m/s), pressure (bar), and temperature (°C) for a direct quote.

Why HVAC Balancing Needs Repeatable Air Flow Data

Commercial HVAC balancing is not a one time event. Many buildings in Southeast Asia run air handlers at 80 percent load without knowing actual airflow. This leads to high energy cost and poor indoor air quality. A technician needs an air flow meter that shows real time values in m3/h or Nm3/h. The meter must work in a duct with limited straight run. It must also survive dust and humidity in places like Jakarta or Lagos.

Thermal Mass Flow Meters for Air and Fan Performance

Silver Instruments thermal mass flow meter series covers air, nitrogen, and other dry gases. The insertion model TFM-100 fits duct sizes from DN100 to DN2000. It measures gas mass flow directly in Nm3/h or kg/h. The sensor works from 0.5 to 100 Nm/s with an accuracy of ±1 percent of reading. The probe length can be 300 mm, 500 mm, or custom for large AHU ducts. Output options include 4-20 mA HART, RS485 Modbus, and pulse. For fan performance tests, this meter tracks airflow changes within 1 second. This speed is enough to see fan curve shifts during damper adjustment.

Differential Pressure Transmitters for Pitot Tube Air Flow

Many HVAC balancers already use pitot tubes. A differential pressure transmitter converts velocity pressure into a 4-20 mA signal. Silver Instruments DP-100 differential pressure transmitter has a range from 0 to 10 kPa, accuracy of 0.075 percent, and a 2 wire HART output. It connects to a standard pitot tube for duct traverse testing. A local LCD readout on this transmitter is useful for building commissioning in the Middle East where dust and heat can hurt sensor performance. For a multi point traverse, use one transmitter per duct section or pair it with our paperless recorder to log 12 channels at once.

Paperless Recorder for Fan Performance Verification

A fan performance test needs more than a single reading. The Silver Instruments R200 paperless recorder stores air flow, static pressure, motor current, and temperature data for up to 30 days. It accepts 4-20 mA, PT100, and thermocouple inputs. Engineers can export data to USB or over Ethernet. The R200 is common for pharmaceutical plants in Vietnam that must prove air change rates to auditors.

Typical Installation in a Commercial Building

Last year an HVAC contractor in Dubai balanced a 38 storey commercial tower. They used two TFM-100 insertion thermal mass flow meters per floor. Each meter was installed through a ball valve hot tap fitting. The contractor did not need to shut down the air handler. They connected the 4-20 mA HART signal to the building management system. The whole job took 3 days. The building now logs airflow per floor and adjusts VAV boxes based on actual load.

How to Specify an Air Flow Meter for Your HVAC Project

You need four values before you ask for a quote. Duct size in DN or width by height. Air velocity or flow range in m/s or m3/h. Static pressure in bar or kPa. Air temperature in °C. Also tell us if the duct has a round or rectangular cross section. For outdoor installations, request IP65 housing. If the air contains dust or oil mist, select a sensor with self cleaning or a purge port. Most engineers skip the purge port. We have seen this on customer sites many times. A small oil mist in a restaurant exhaust can coat the sensor and cause drift. Call Silver Instruments at Tel +86-25-68650347 or WhatsAp