Anuba flowmeter manufacturer| biogas flow rate meter

『Anuba flowmeter manufacturer』Related information(clamp on meter|electromagnetic meter|venturi meterrotameter|orifice meter|ultrasonic flow meter|mass flow meter|coriolis mass flow meter|coriolis flow meter|magnetic flow meter|magmeter flow meter|magflow flow meter|mag meter flow meter|electromagnetic flow meter|vortex flow meter|turbine flow meter|thermal mass flow meter|thermal flow meter|rotameter flow meter)

1. Advantages of Annubar flowmeter

KERNB Annubar flowmeter (also known as flute shaped averaging tube flowmeter) is a new type of differential pressure flow detection component developed based on the principle of pitot tube speed measurement. The Anuba flowmeter provided by Kener Company The appearance process design is novel, the structure is reasonable, the precision is high, the pressure loss is small, and the installation and use are convenient. With its special advantages, it has gradually replaced orifice plates and other detection components in many occasions. The product has passed the EU CE certification. The output of the KERNB Annubar flowmeter is a differential pressure signal, which is used in conjunction with instruments for measuring differential pressure. It can accurately measure various liquids, gases, and vapors (superheated steam and saturated steam) in circular and rectangular pipelines. The size range of the tested pipeline is from 20mm to 3000mm. KERNB has been successfully used in sectors such as power industry (including nuclear industry), chemical industry, petrochemicals, and metal smelting industry. It is suitable for: gas and liquid transportation, energy research, steam boiler thermal efficiency, water pump efficiency, gas compressor efficiency, and fuel consumption; ·Process control: input/output, ratio/balance; Cooling water or air; Steam heating, chemical industry feeding, load balancing: The advantages of the Annubar flowmeter (compared to orifice plates) are high accuracy and good stability, with an accuracy of 1% and 0.5% for pumps, compressors, coolers, and filters The stability is 0.1%, which can maintain a very stable differential pressure signal output for a long time, e

nsuring the mapping relationship between the output differential pressure signal and pipeline flow. This is because factors such as wear, corrosion, and adhesion of oil and dust during use have little effect on the coefficient of the Annubar flowmeter, but these factors increase the flow coefficient of the orifice plate, and it will increase to over 20%, resulting in an error of over 20%. We can see from this that the accuracy of Anuba has been stable for a long time. The design is reasonable, easy to install, and economical. The Anuba is lightweight, easy to install and disassemble, and does not require lifting tools. The product series includes quick closing switches that can be installed or disassembled without stopping the tested pipeline. Due to the lightweight and convenient installation and disassembly of the Anuba, it can save you considerable installation costs. For example, when installing a flow meter on a 200mm diameter pipeline, Anuba only has one 150mm long weld seam, while the orifice plate has two 1200mm long welds. In terms of working hours, installing an Annubar flowmeter only requires 0.5 hours, while installing an orifice plate requires 12 hours, which is beneficial for pipeline layout. Annubar is not only suitable for circular pipelines, but also for rectangular pipelines and pipelines buried at any depth below the ground. The length requirement for the straight pipe section upstream and downstream of Anuba is much lower than that of the orifice plate. When installed at a distance of twice the pipe diameter behind the elbow, stable and highly accurate state signals can still be obtained. This is the unique advantage of Anuba, which brings great flexibility to the layout design of pipelines, especiall

Anuba flowmeter manufacturer

1. Advantages of Annubar flowmeter

『SILVER Official Website SERVICE』